Dokumentista:
http://agua.nu/ds-files/tony-jackson/re ... stment.pdflöytyy mm. seuraavaa selostusta CRC:stä:
Further information on the Clutch Re-engagement Control (CRC) fitted to 5-main-bearing engined cars only
(1967 DS 21 etc). Earlier correctors are substantially different.
The CRC is a fairly simple control. Its job is to modulate the release of pressure from the clutch cylinder as
a function of throttle position. Hydraulic fluid is released more slowly when the accelerator is released (throttle
closed) and more quickly the more the accelerator is applied (throttle open).
There is a secondary function of the CRC which was not present on earlier models. During gearchange,
that is, when the clutch is disengaged and the clutch cylinder is pressurised, the CRC closes the throttle. Even if the
accelerator is fully depressed, the throttle will be partially closed by the CRC. This is designed to avoid
overspeeding the engine when changing gear.
Sitten vielä:
http://agua.nu/ds-files/tony-jackson/re ... linger.pdf